10 Do-It-Yourself Woodworking Tips... Tip No. 17 Of 714
To get off on the right foot, use these tips as you plan out your next project. That will allow you to use the right techniques to ensure your end result is on target. Once you get that project under your belt, you'll be able to complete others and truly enjoy woodworking as a hobby.
Safety is optimal when you are woodworking books. When crosscutting, clamp a block onto the fence to properly set the length. This will prevent any movement from your board when you are cutting. Clamps leave the end of the board free to cut.
Stir, never shake stains and finishes before use. Over time, these settle, so mixing is necessary. Shaking, however, adds bubbles and doesn't always mix the stain or finish thoroughly. Stirring mixes the products better by evenly mixing in any settlement that occurred during storage. Stains and finishes that are not mixed thoroughly will not apply correctly to the wood you're staining and are at risk of looking blotchy.
Woodworking can be expensive. The actual wood is one of the most expensive parts of any project. The rest of the cost is usually labor, glue and hardware. Sometimes you can save some money by buying a cheaper grade of wood for areas of your project that are not visible. Areas like drawers, backs and bottoms are excellent places to use this wood.
Be sure to keep your bandsaw clean at all times. It is best to have a duster on hand when you are doing the sawing for your woodworking project so that you can clean the saw after each time that you use it to cut wood. This will ensure that you can get a great cut every time.
When you are new at woodworking books and starting to collect your tools, purchase simple tools to begin with. Try your hand at a few projects to make sure you want to continue before you invest in expensive tools. You can save money and get better quality tools when you buy used tools.
If you are new to woodworking, stick with a cheap and effective tool bag. Many of the tools to start with are under a couple hundred dollars and very easy to find and use for basic projects. These tools include a benchtop tablesaw, a jigsaw or sabre saw, a circular saw, a random orbit sander, a corded or cordless drill, a fixed-base or plunge router, and a pipe and small bar clamps.
Take care when using power tools. If you are new to woodworking, be very careful when you are operating power tools for the first time. Read the manual thoroughly, and if possible, have someone with experience demonstrate how to use it properly. This will ensure that you don't have a nasty accident during your woodworking project.
Never allow someone to watch while you are woodworking without wearing the same gear that you are wearing. Being anywhere near the tools is a hazard, even if they are not using them. Wood or parts of the tool could fly into the air and strike them just as they could you.
Attached a small magnet to the bottom of your hammer's handle to hold several nails when working above your head or on a ladder. This simple technique allows you to keep your nails handy and avoid climbing up and down the ladder when you are working above your head.
As was discussed in the beginning of this article, woodworking is a really wonderful activity. Although certainly not easy, it is incredibly rewarding. To be the best woodworker that you can be, you must educate yourself on the top woodworking tips and tricks. Study this article and all of the helpful tips that it contains to improve your woodworking books skills.
Make sure your workbench is the proper height. It really can make a big difference. It needs to fit you and how you work. Usually if you are around 5'6" to 5'9" you probably need one that is between 33" and 36" high. If you are 5'10" or taller, you may need one that is between 35" and 37" high. Use your bench at its current height to determine if you need to change it to work better for you.
Dust can ruin the finish of any woodworking project. Keep dust away from your projects and workbench by vacuuming it up. If you blow or brush it away, it will just land somewhere else, likely back on your project. Also, use a damp cloth to wipe all surfaces before you begin top-coating, or staining.
As you can see, woodworking offers something for anyone who is interested in getting into the world of crating hand crafted items. The possibilities are endless. You can make things as simple as a small birdhouse or an elaborate dollhouse. All it takes is some wood, a few tools and creativity.
Make your own sanding block. Although sanding blocks provide you with more control and are easier to handle, you shouldn't purchase expensive sandpaper holders. You can use some scrap plywood to create your own. Cut a scrap of wood for each grit of sandpaper, spray with adhesive and apply your sandpaper.
When staining woods, always test in a hard to see area before moving forward. In fact, if you've got a piece of scrap wood, that's even better. You never know how a type of wood will take to stain, so it's best to find out in a place that won't be an issue later on.